The next generation of the Bren the Bren 2 Ms makes first landfall in the US in pistol form with multiple barrel lengths and two chamberings. Whereas the 805 Bren was designed to a specific set of requirements set out by the Czech military the Bren 2 is a clean-sheet design. With a bevy of changes the most noticeable is sure to be the strict weight-loss regimen that the Bren 2 has undergone. With a trimmed-down aluminum receiver and a lower made from carbon fiber-reinforced polymer the result is a robust but substantially lighter gun. – Gone is the reciprocating charging handle replaced with one that stays stowed in the forward position until it is needed. Swappable from side to side it does double duty as a forward assist. Also added is an AR-style bolt catch/release system that is mirrored on both sides of the firearm as well as a catch/release nestled into the front of the trigger guard. The magazine release and safety are also ambidextrous and located in very familiar locations for anyone versed in the AR platform. – Chambered in 223 and 7.62×39 each is available in several barrel lengths. AR-15 style magazines are used for 223 variants whereas in 7.62 the factorys magazines are used to ensure last round hold-open and consistent feeding. All variants are swappable to different barrel lengths and chamberings and also feature a modular forend that can be swapped to different lengths. – In pistol form the Bren 2 Ms comes with a flush rear plate that has the provision for attaching a AR-style buffer tube for the installation of an arm brace cheek rest or similar pistol stabilizing device. For those who wish to SBR a Carbine buffer tube and stock can be installed or the entire rear plate can be removed and replaced with a factory folding/adjustable stock. – Chambering: 7.62×39 – Magazine Capacity: 30 – Magazine Type: Detachable – Frame: Carbon Fiber-reinforced Polymer – Grips: Stippled – Sights: Folding adjustable – Barrel Length: 11.14 in – Barrel: Cold Hammer Forged – Weight: 5.625 lbs – Overall Length: 22.8 in – Safety: Ambidextrous Manual Safety
CZ BREN 2 MS 7.62X39 11 PISTOL
CZ BREN 2 MS 7.62X39 11 PISTOL
$2,166.00
3 in stock
UPC | 806703914619 |
---|---|
Manufacturer | |
Manufacturer Part Number | 91461 |
Sights Type | ADJUSTABLE |
Action | Semi-Auto |
Number of Magazines | 1 |
State Restriction (OR) | NO SALE TO OREGON |
State Restriction (WA) | NO DIRECT SHIP TO WASHINGTON |
State Restriction (RI) | NO DIRECT SHIP TO RHODE ISLAND |
State Restriction (NJ) | NO DIRECT SHIP TO NEW JERSEY |
Capacity | 30 |
Length | 37.9000 |
Caliber/Gauge | 7.62 x 39mm |
Barrel Length | 11.1400 |
Product Type | AR Pistol |
Sights | Adjustable Folding Front & Rear |
Safety | Ambidextrous |
Model | Bren 2 |
ATF Type | Pistol |
Shipping Weight | 11.65 |
Package Width | 12.0 |
Package Height | 4.0 |
Magazine Included | 2 x 30-Round |
The next generation of the Bren the Bren 2 Ms makes first landfall in the US in pistol form with multiple barrel lengths and two chamberings. Whereas the 805 Bren was designed to a specific set of requirements set out by the Czech military the Bren 2 is a clean-sheet design. With a bevy of changes the most noticeable is sure to be the strict weight-loss regimen that the Bren 2 has undergone. With a trimmed-down aluminum receiver and a lower made from carbon fiber-reinforced polymer the result is a robust but substantially lighter gun. – Gone is the reciprocating charging handle replaced with one that stays stowed in the forward position until it is needed. Swappable from side to side it does double duty as a forward assist. Also added is an AR-style bolt catch/release system that is mirrored on both sides of the firearm as well as a catch/release nestled into the front of the trigger guard. The magazine release and safety are also ambidextrous and located in very familiar locations for anyone versed in the AR platform. – Chambered in 223 and 7.62×39 each is available in several barrel lengths. AR-15 style magazines are used for 223 variants whereas in 7.62 the factorys magazines are used to ensure last round hold-open and consistent feeding. All variants are swappable to different barrel lengths and chamberings and also feature a modular forend that can be swapped to different lengths. – In pistol form the Bren 2 Ms comes with a flush rear plate that has the provision for attaching a AR-style buffer tube for the installation of an arm brace cheek rest or similar pistol stabilizing device. For those who wish to SBR a Carbine buffer tube and stock can be installed or the entire rear plate can be removed and replaced with a factory folding/adjustable stock. – Chambering: 7.62×39 – Magazine Capacity: 30 – Magazine Type: Detachable – Frame: Carbon Fiber-reinforced Polymer – Grips: Stippled – Sights: Folding adjustable – Barrel Length: 11.14 in – Barrel: Cold Hammer Forged – Weight: 5.625 lbs – Overall Length: 22.8 in – Safety: Ambidextrous Manual Safety
UPC | 806703914619 |
---|---|
Manufacturer | |
Manufacturer Part Number | 91461 |
Sights Type | ADJUSTABLE |
Action | Semi-Auto |
Number of Magazines | 1 |
State Restriction (OR) | NO SALE TO OREGON |
State Restriction (WA) | NO DIRECT SHIP TO WASHINGTON |
State Restriction (RI) | NO DIRECT SHIP TO RHODE ISLAND |
State Restriction (NJ) | NO DIRECT SHIP TO NEW JERSEY |
Capacity | 30 |
Length | 37.9000 |
Caliber/Gauge | 7.62 x 39mm |
Barrel Length | 11.1400 |
Product Type | AR Pistol |
Sights | Adjustable Folding Front & Rear |
Safety | Ambidextrous |
Model | Bren 2 |
ATF Type | Pistol |
Shipping Weight | 11.65 |
Package Width | 12.0 |
Package Height | 4.0 |
Magazine Included | 2 x 30-Round |
Reviews
There are no reviews yet.
Reviews
There are no reviews yet.